Products7 Select7 select, gourmet jelly beans
NO_IMAGE
Barcode 0052548584665
7 Select,7-Eleven Inc.

7 select, gourmet jelly beans

BARCODE:0052548584665
BRAND OWNER:7-Eleven, Inc.
CATEGORIES:Snacks, Sweet Snacks, Confectioneries, Candies, Gummi Candies, Jelly Beans
COUNTRIES:United States

Health

Nutrition

Nutri-Score

ELower nutritional quality

Nutri-Score data warning

Warning: the amount of fruits, vegetables and nuts is not specified on the label, it was estimated from the list of ingredients: 0

Nutrient levels

Fat in low quantity (0%)
What you need to know • A high consumption of fat, especially saturated fats, can raise cholesterol, which increases the risk of heart diseases. Recommendation: Limit the consumption of fat and saturated fat • Choose products with lower fat and saturated fat content. Source: National Health Service UK (NHS) - Fat: the facts
Saturated fat in low quantity (0%)
What you need to know • A high consumption of fat, especially saturated fats, can raise cholesterol, which increases the risk of heart diseases. Recommendation: Limit the consumption of fat and saturated fat • Choose products with lower fat and saturated fat content. Source: National Health Service UK (NHS) - Fat: the facts
Sugars in high quantity (70%)
What you need to know • A high consumption of sugar can cause weight gain and tooth decay. It also augments the risk of type 2 diabetes and cardio-vascular diseases. Recommendation: Limit the consumption of sugar and sugary drinks • Sugary drinks (such as sodas, fruit beverages, and fruit juices and nectars) should be limited as much as possible (no more than 1 glass a day). • Choose products with lower sugar content and reduce the consumption of products with added sugars. Source: National Health Service UK (NHS) - Sugar: the facts
Salt in low quantity (0%)
What you need to know • A high consumption of salt (or sodium) can cause raised blood pressure, which can increase the risk of heart disease and stroke. • Many people who have high blood pressure do not know it, as there are often no symptoms. • Most people consume too much salt (on average 9 to 12 grams per day), around twice the recommended maximum level of intake. Recommendation: Limit the consumption of salt and salted food • Reduce the quantity of salt used when cooking, and don't salt again at the table. • Limit the consumption of salty snacks and choose products with lower salt content. Source: World Health Organization (WHO) - Fact sheet - Salt reduction Source: National Health Service UK (NHS) - Salt: the facts

Nutrition facts

Nutrition factsAs sold for 100 g / 100 mlCompared to: Jelly beans
Energy1569 kcal (375 kcal)1,540.124 kJ (362 kcal)
Fat0 g0.082 g (-100%)
Saturated fat0 g0.029 g (-100%)
Trans fat0 g0 g
Cholesterol0 mg0 mg
Carbohydrates92.5 g89.969 g (+3%)
Sugars70 g66.186 g (+6%)
Dietary fiber0 g?
Proteins0 g0.053 g (-100%)
Salt0 mg0.081 g (-100%)
Sodium0 mg0.032 g (-100%)
Vitamin A0 IU0 µg
Vitamin C0 mg?
Calcium0 mg1.332 mg (-100%)
Iron0 mg0.041 mg (-100%)
Fruits, vegetables and legumes??

Nutrition facts (Detailed data)

Nutrition factsAs sold for 100 g / 100 mlAs sold Per serving (legacy)
Energy1569 kcal (375 kcal)628 kcal (150 kcal)
Fat0 g0 g
Saturated fat0 g0 g
Trans fat0 g0 g
Cholesterol0 mg0 mg
Carbohydrates92.5 g37 g
Sugars70 g28 g
Dietary fiber0 g0 g
Proteins0 g0 g
Salt0 mg0 mg
Sodium0 mg0 mg
Vitamin A0 IU0 IU
Vitamin C0 mg0 mg
Calcium0 mg0 mg
Iron0 mg0 mg
Fruits, vegetables and legumes??

Serving size

18 PCS (40 g)

Ingredients

Ingredients list

Sugar, corn syrup, modified food starch, high fructose corn syrup/dextrose, corn starch, carnauba wax, mineral oil, natural and artificial flavor, color (fd&c yellow #5, red #3, red #40, blue #1).

Ingredient information

Sugar
55% (estimate)
Corn Syrup
22.5% (estimate)
Modified Starch
11.25% (estimate)
High Fructose Corn Syrup
5.63% (estimate)
Dextrose
2.81% (estimate)
Corn Starch
1.41% (estimate)
E903
0.7% (estimate)
E905a
0.35% (estimate)
Natural And Artificial Flavouring
0.18% (estimate)
Colour
0.18% (estimate)
E102
0.09% (estimate)
E127
0.04% (estimate)
E129
0.02% (estimate)
E133
0.02% (estimate)

Added sugars

Contains added sugars (~ 85%) Added sugars: sugar, corn syrup, high fructose corn syrup, dextrose Estimated quantity of added sugars in ingredients: 85%

Ingredients analysis

Palm oil free
Yes

No ingredients containing palm oil.

Vegan
Unknown

Vegan status unknown

Vegetarian
Unknown

Vegetarian status unknown


Food Processing

NOVA group

4Ultra-processed food and drink products

Elements that indicate the product is in NOVA group 4

Additives
E102 - Tartrazine
Additives
E127 - Erythrosine
Additives
E129 - Allura red
Additives
E133 - Brilliant blue FCF
Additives
E903 - Carnauba wax
Additives
E905 - Synthetic wax
Ingredients
Colour
Ingredients
Dextrose
Ingredients
Flavouring
Ingredients
Glucose
Ingredients
High Fructose Corn Syrup
Ingredients
Modified Starch
Ingredients
Fructose

How NOVA works

The NOVA classification assigns food products into 4 groups based on their degree of processing: 1. Unprocessed or minimally processed foods 2. Processed culinary ingredients 3. Processed foods 4. Ultra-processed food and drink products

Additives

E102 - TartrazineColour

Tartrazine (E102) is a synthetic lemon-yellow azo dye used as a food coloring.

It is found in a wide range of products such as soft drinks, desserts, candies, and snack foods to give them a vibrant yellow appearance.

While approved by many regulatory agencies, tartrazine has been linked to allergic reactions, such as hives, in a small portion of the population. Some studies have also suggested a link to increased hyperactivity in children, particularly when consumed with other additives like benzoates.

E127 - ErythrosineColour

ERYTHROSINE, is an organoiodine compound, specifically a derivative of fluorone. It is cherry or melon-pink synthetic, primarily used for food coloring.

E129 - Allura red EFSA overexposure risk: noColour

Allura Red AC is a red azo dye that goes by several names, including FD&C Red 40. It is used as a food dye and has the E number E129. It is usually supplied as its red sodium salt, but can also be used as the calcium and potassium salts. These salts are soluble in water. In solution, its maximum absorbance lies at about 504 nm.

E133 - Brilliant blue FCF EFSA overexposure risk: moderateColour

BRILLIANT BLUE FCF (Blue 1) is an organic compound classified as a blue triarylmethane dye, reflecting its chemical structure. Known under various commercial names, it is a colorant for foods and other substances.

E903 - Carnauba waxCarrier

Carnauba (; Portuguese: carnaúba [kaʁnɐˈubɐ]), also called Brazil wax and palm wax, is a wax of the leaves of the palm Copernicia prunifera (Synonym: Copernicia cerifera), a plant native to and grown only in the northeastern Brazilian states of Piauí, Ceará, Maranhão, Bahia, and Rio Grande do Norte. It is known as "queen of waxes" and in its pure state, usually comes in the form of hard yellow-brown flakes. It is obtained from the leaves of the carnauba palm by collecting and drying them, beating them to loosen the wax, then refining and bleaching the wax.

E905 - Synthetic wax

Microcrystalline waxes are a type of wax produced by de-oiling petrolatum, as part of the petroleum refining process. In contrast to the more familiar paraffin wax which contains mostly unbranched alkanes, microcrystalline wax contains a higher percentage of isoparaffinic (branched) hydrocarbons and naphthenic hydrocarbons. It is characterized by the fineness of its crystals in contrast to the larger crystal of paraffin wax. It consists of high molecular weight saturated aliphatic hydrocarbons. It is generally darker, more viscous, denser, tackier and more elastic than paraffin waxes, and has a higher molecular weight and melting point. The elastic and adhesive characteristics of microcrystalline waxes are related to the non-straight chain components which they contain. Typical microcrystalline wax crystal structure is small and thin, making them more flexible than paraffin wax. It is commonly used in cosmetic formulations. Microcrystalline waxes when produced by wax refiners are typically produced to meet a number of ASTM specifications. These include congeal point (ASTM D938), needle penetration (D1321), color (ASTM D6045), and viscosity (ASTM D445). Microcrystalline waxes can generally be put into two categories: "laminating" grades and "hardening" grades. The laminating grades typically have a melt point of 140-175 F (60 - 80 oC) and needle penetration of 25 or above. The hardening grades will range from about 175-200 F (80 - 93 oC), and have a needle penetration of 25 or below. Color in both grades can range from brown to white, depending on the degree of processing done at the refinery level. Microcrystalline waxes are derived from the refining of the heavy distillates from lubricant oil production. This by-product must then be de-oiled at a wax refinery. Depending on the end use and desired specification, the product may then have its odor removed and color removed (which typically starts as a brown or dark yellow). This is usually done by means of a filtration method or by hydro-treating the wax material.

E905a - mineral oil

Microcrystalline waxes are a type of wax produced by de-oiling petrolatum, as part of the petroleum refining process. In contrast to the more familiar paraffin wax which contains mostly unbranched alkanes, microcrystalline wax contains a higher percentage of isoparaffinic (branched) hydrocarbons and naphthenic hydrocarbons. It is characterized by the fineness of its crystals in contrast to the larger crystal of paraffin wax. It consists of high molecular weight saturated aliphatic hydrocarbons. It is generally darker, more viscous, denser, tackier and more elastic than paraffin waxes, and has a higher molecular weight and melting point. The elastic and adhesive characteristics of microcrystalline waxes are related to the non-straight chain components which they contain. Typical microcrystalline wax crystal structure is small and thin, making them more flexible than paraffin wax. It is commonly used in cosmetic formulations. Microcrystalline waxes when produced by wax refiners are typically produced to meet a number of ASTM specifications. These include congeal point (ASTM D938), needle penetration (D1321), color (ASTM D6045), and viscosity (ASTM D445). Microcrystalline waxes can generally be put into two categories: "laminating" grades and "hardening" grades. The laminating grades typically have a melt point of 140-175 F (60 - 80 oC) and needle penetration of 25 or above. The hardening grades will range from about 175-200 F (80 - 93 oC), and have a needle penetration of 25 or below. Color in both grades can range from brown to white, depending on the degree of processing done at the refinery level. Microcrystalline waxes are derived from the refining of the heavy distillates from lubricant oil production. This by-product must then be de-oiled at a wax refinery. Depending on the end use and desired specification, the product may then have its odor removed and color removed (which typically starts as a brown or dark yellow). This is usually done by means of a filtration method or by hydro-treating the wax material.

Environment

Green-Score, origins bonus, and transportation impact are shown for Worldwide .

Green Score

Overall grade

BLow environmental impact

About Green-Score

The Green-Score is an experimental score that summarizes the environmental impacts of food products.

Current scope

The Green-Score was initially developed for France and it is being extended to other European countries. The Green-Score formula is subject to change as it is regularly improved to make it more precise and better suited to each country. Select a country to include the full impact of transportation in the final score.

Life cycle analysis

Average impact of the category

AJelly candy • Score: 89/100

Life-cycle reference

Category: Jelly candy PEF environmental score: 0.20 Climate change impact: 1.56 kg CO2 eq / kg product The overall environmental impact figure (PEF) comes from ADEME's Agribalyse database, for the category: Jelly candy. Source: ADEME Agribalyse Database.

Overall environmental impact by stage (PEF)

The overall environmental impact figure (PEF) comes from ADEME's Agribalyse database, for the category: Jelly candy. Source: ADEME Agribalyse Database.

StageImpact
Agriculture51.7 %
Processing31.0 %
Packaging7.7 %
Transportation7.3 %
Distribution2.3 %
Consumption0.0 %

Bonuses and maluses

Declared origins

Origins of ingredients are missing for this product. Ingredients need to be completed before the transportation bonus can be computed precisely.

Packaging impact

Packaging with a high impact Malus: -15 The information about the packaging of this product is not filled in.

Green-Score for this product

Green-Score for this product

BFinal score: 69/100

Final score breakdown

Life cycle analysis score: 89 Sum of bonuses and maluses: -20 Final score: 69/100

Carbon footprint

Carbon footprint

Equivalent to driving 0.8 km in a petrol car. 156 g CO2e per 100g of product. Reference category: Jelly candy. The carbon emission figure comes from ADEME's Agribalyse database, for the category: Jelly candy. Source: ADEME Agribalyse Database.

Climate impact by stage (CO2e)

The carbon emission figure comes from ADEME's Agribalyse database, for the category: Jelly candy. Source: ADEME Agribalyse Database.

StageImpact
Agriculture36.7 %
Processing38.2 %
Packaging11.9 %
Transportation12.0 %
Distribution1.1 %
Consumption0.0 %

Packaging

Packaging impact

Packaging with a high impact Malus: -15 The information about the packaging of this product is not filled in.

Data precision

The packaging information is not sufficiently precise to compute the most accurate packaging impact. Exact shapes and materials of all packaging components help improve the Green-Score.

Transportation

Declared origins

Origins of ingredients are missing for this product. Ingredients need to be completed before the transportation bonus can be computed precisely.

Data Source

Product data comes from Open Food Facts. Food Benchmark also adds translations, category comparisons and explanatory calculations.

The database is licensed under ODbL 1.0, individual contents under DbCL 1.0, and product photos under CC BY-SA 3.0.

Product added on March 9, 2017 at 2:59:37 PM UTC by usda-ndb-import .

Last edit on April 22, 2020 at 7:48:58 PM UTC by org-database-usda .

Product page also edited by usda-ndb-import, org-database-usda, clockwerx.

Source List