ProductsTwizzlersHershey's Twizzlers Candy Straws
Hershey's Twizzlers Candy Straws
Barcode 0034000502349
Twizzlers

Hershey's Twizzlers Candy Straws

BARCODE:0034000502349
CATEGORIES:Snacks, Sweet Snacks, Confectioneries
LABELS:Contains Gmos
COUNTRIES:France

Health

Nutrition

Nutri-Score data warning

Warning: the amount of fruits, vegetables and nuts is not specified on the label, it was estimated from the list of ingredients: 0

Nutrient levels

Fat in low quantity (1.79%)
What you need to know • A high consumption of fat, especially saturated fats, can raise cholesterol, which increases the risk of heart diseases. Recommendation: Limit the consumption of fat and saturated fat • Choose products with lower fat and saturated fat content. Source: National Health Service UK (NHS) - Fat: the facts
Sugars in high quantity (42.9%)
What you need to know • A high consumption of sugar can cause weight gain and tooth decay. It also augments the risk of type 2 diabetes and cardio-vascular diseases. Recommendation: Limit the consumption of sugar and sugary drinks • Sugary drinks (such as sodas, fruit beverages, and fruit juices and nectars) should be limited as much as possible (no more than 1 glass a day). • Choose products with lower sugar content and reduce the consumption of products with added sugars. Source: National Health Service UK (NHS) - Sugar: the facts
Salt in moderate quantity (0.536%)
What you need to know • A high consumption of salt (or sodium) can cause raised blood pressure, which can increase the risk of heart disease and stroke. • Many people who have high blood pressure do not know it, as there are often no symptoms. • Most people consume too much salt (on average 9 to 12 grams per day), around twice the recommended maximum level of intake. Recommendation: Limit the consumption of salt and salted food • Reduce the quantity of salt used when cooking, and don't salt again at the table. • Limit the consumption of salty snacks and choose products with lower salt content. Source: World Health Organization (WHO) - Fact sheet - Salt reduction Source: National Health Service UK (NHS) - Salt: the facts

Nutrition label

Hershey's Twizzlers Candy Straws nutrition label

Nutrition facts

Nutrition factsAs sold for 100 g / 100 mlCompared to: Confectioneries
Energy1490 kcal (357 kcal)1,789.024 kJ (424 kcal)
Fat1.79 g15.443 g (-88%)
Saturated fat?7.141 g
Carbohydrates78.6 g65.572 g (+20%)
Sugars42.9 g47.002 g (-9%)
Added sugars42.9 g39.187 g (+9%)
Dietary fiber??
Proteins1.79 g4.399 g (-59%)
Salt0.536 g0.162 g (+231%)
Sodium0.214 g0.065 g (+229%)
Potassium0.0357 g246.833 mg (-86%)
Iron0.00143 g1.282 mg (+12%)
Fruits, vegetables and legumes??

Nutrition facts (Detailed data)

Nutrition factsAs sold for 100 g / 100 mlAs sold Per serving (legacy)
Energy1490 kcal (357 kcal)418 kcal (100 kcal)
Fat1.79 g0.5 g
Saturated fat??
Carbohydrates78.6 g22 g
Sugars42.9 g12 g
Added sugars42.9 g12 g
Dietary fiber??
Proteins1.79 g0.5 g
Salt0.536 g0.15 g
Sodium0.214 g0.06 g
Potassium0.0357 g0.01 g
Iron0.00143 g0.0004 g
Fruits, vegetables and legumes??

Serving size

3 pieces (28 g)

Ingredients

Ingredients image

Hershey's Twizzlers Candy Straws ingredients image

Ingredients list

corn syrup, enriched wheat flour [flour, niacin, ferrous sulfate, thiamin mononitrate, riboflavin, folic acid], sugar, contains 2% or less of: palm oil, salt, glyceryl monostearate, cornstarch, natural flavor and artificial flavor, glycerin, citric acid, mineral oil, artificial color (red 40, blue 1, yellow 6, yellow 5), carnauba wax.

Ingredient information

Corn Syrup
53.57% (estimate)
Fortified Wheat Flour
23.21% (estimate)
Flour
11.61% (estimate)
E375
5.8% (estimate)
Ferrous Sulfate
2.9% (estimate)
Thiamin Mononitrate
1.45% (estimate)
E101
0.73% (estimate)
Folic Acid
0.73% (estimate)
Sugar
11.61% (estimate)
Contains 2 And Less Of
5.8% (estimate)
Palm Oil
5.8% (estimate)
Salt
0.27% (estimate)
E471
0.27% (estimate)
Corn Starch
0.27% (estimate)
Natural Flavouring
0.27% (estimate)
Artificial Flavouring
0.27% (estimate)
E422
0.27% (estimate)
E330
0.27% (estimate)
E905a
0.27% (estimate)
Colour
0.27% (estimate)
E129
0.13% (estimate)
E133
0.07% (estimate)
E110
0.03% (estimate)
E102
0.03% (estimate)
E903
3.39% (estimate)

Added sugars

Contains added sugars (42%) Added sugars: corn syrup, sugar Quantity of added sugars: 42%

Allergens

Gluten

Ingredients analysis

Palm oil free
No

Contains ingredients containing palm oil.

Vegan
Unknown

Vegan status unknown

Unrecognized: en:ferrous-sulfate

Vegetarian
Unknown

Vegetarian status unknown

Unrecognized: en:ferrous-sulfate


Food Processing

NOVA group

4Ultra-processed food and drink products

Elements that indicate the product is in NOVA group 4

Additives
E102 - Tartrazine
Additives
E110 - Sunset yellow FCF
Additives
E129 - Allura red
Additives
E133 - Brilliant blue FCF
Additives
E422 - Glycerol
Additives
E471 - Mono- and diglycerides of fatty acids
Additives
E903 - Carnauba wax
Additives
E905 - Synthetic wax
Ingredients
Colour
Ingredients
Flavouring

How NOVA works

The NOVA classification assigns food products into 4 groups based on their degree of processing: 1. Unprocessed or minimally processed foods 2. Processed culinary ingredients 3. Processed foods 4. Ultra-processed food and drink products

Additives

E102 - TartrazineColour

Tartrazine (E102) is a synthetic lemon-yellow azo dye used as a food coloring.

It is found in a wide range of products such as soft drinks, desserts, candies, and snack foods to give them a vibrant yellow appearance.

While approved by many regulatory agencies, tartrazine has been linked to allergic reactions, such as hives, in a small portion of the population. Some studies have also suggested a link to increased hyperactivity in children, particularly when consumed with other additives like benzoates.

E110 - Sunset yellow FCFColour

Sunset Yellow FCF (also known as Orange Yellow S, or C.I. 15985) is a petroleum-derived orange azo dye with a pH dependent maximum absorption at about 480 nm at pH 1 and 443 nm at pH 13 with a shoulder at 500 nm. When added to foods sold in the US it is known as FD&C Yellow 6; when sold in Europe, it is denoted by E Number E110.

E129 - Allura red EFSA overexposure risk: noColour

Allura Red AC is a red azo dye that goes by several names, including FD&C Red 40. It is used as a food dye and has the E number E129. It is usually supplied as its red sodium salt, but can also be used as the calcium and potassium salts. These salts are soluble in water. In solution, its maximum absorbance lies at about 504 nm.

E133 - Brilliant blue FCF EFSA overexposure risk: moderateColour

BRILLIANT BLUE FCF (Blue 1) is an organic compound classified as a blue triarylmethane dye, reflecting its chemical structure. Known under various commercial names, it is a colorant for foods and other substances.

E330 - Citric acidAntioxidantSequestrant

Citric acid is a natural organic acid found in citrus fruits such as lemons, oranges, and limes.

It is widely used in the food industry as a flavor enhancer, acidulant, and preservative due to its tart and refreshing taste.

Citric acid is safe for consumption when used in moderation and is considered a generally recognized as safe (GRAS) food additive by regulatory agencies worldwide.

E422 - GlycerolHumectantThickener

Glycerol (; also called glycerine or glycerin; see spelling differences) is a simple polyol compound. It is a colorless, odorless, viscous liquid that is sweet-tasting and non-toxic. The glycerol backbone is found in all lipids known as triglycerides. It is widely used in the food industry as a sweetener and humectant and in pharmaceutical formulations. Glycerol has three hydroxyl groups that are responsible for its solubility in water and its hygroscopic nature.

E471 - Mono- and diglycerides of fatty acidsEmulsifierStabiliser

Mono- and diglycerides of fatty acids (E471), are food additives commonly used as emulsifiers in various processed foods.

These compounds consist of glycerol molecules linked to one or two fatty acid chains, which help stabilize and blend water and oil-based ingredients. E471 enhances the texture and shelf life of products like margarine, baked goods, and ice cream, ensuring a smooth and consistent texture.

It is generally considered safe for consumption within established regulatory limits.

E903 - Carnauba waxCarrier

Carnauba (; Portuguese: carnaúba [kaʁnɐˈubɐ]), also called Brazil wax and palm wax, is a wax of the leaves of the palm Copernicia prunifera (Synonym: Copernicia cerifera), a plant native to and grown only in the northeastern Brazilian states of Piauí, Ceará, Maranhão, Bahia, and Rio Grande do Norte. It is known as "queen of waxes" and in its pure state, usually comes in the form of hard yellow-brown flakes. It is obtained from the leaves of the carnauba palm by collecting and drying them, beating them to loosen the wax, then refining and bleaching the wax.

E905 - Synthetic wax

Microcrystalline waxes are a type of wax produced by de-oiling petrolatum, as part of the petroleum refining process. In contrast to the more familiar paraffin wax which contains mostly unbranched alkanes, microcrystalline wax contains a higher percentage of isoparaffinic (branched) hydrocarbons and naphthenic hydrocarbons. It is characterized by the fineness of its crystals in contrast to the larger crystal of paraffin wax. It consists of high molecular weight saturated aliphatic hydrocarbons. It is generally darker, more viscous, denser, tackier and more elastic than paraffin waxes, and has a higher molecular weight and melting point. The elastic and adhesive characteristics of microcrystalline waxes are related to the non-straight chain components which they contain. Typical microcrystalline wax crystal structure is small and thin, making them more flexible than paraffin wax. It is commonly used in cosmetic formulations. Microcrystalline waxes when produced by wax refiners are typically produced to meet a number of ASTM specifications. These include congeal point (ASTM D938), needle penetration (D1321), color (ASTM D6045), and viscosity (ASTM D445). Microcrystalline waxes can generally be put into two categories: "laminating" grades and "hardening" grades. The laminating grades typically have a melt point of 140-175 F (60 - 80 oC) and needle penetration of 25 or above. The hardening grades will range from about 175-200 F (80 - 93 oC), and have a needle penetration of 25 or below. Color in both grades can range from brown to white, depending on the degree of processing done at the refinery level. Microcrystalline waxes are derived from the refining of the heavy distillates from lubricant oil production. This by-product must then be de-oiled at a wax refinery. Depending on the end use and desired specification, the product may then have its odor removed and color removed (which typically starts as a brown or dark yellow). This is usually done by means of a filtration method or by hydro-treating the wax material.

E905a - mineral oil

Microcrystalline waxes are a type of wax produced by de-oiling petrolatum, as part of the petroleum refining process. In contrast to the more familiar paraffin wax which contains mostly unbranched alkanes, microcrystalline wax contains a higher percentage of isoparaffinic (branched) hydrocarbons and naphthenic hydrocarbons. It is characterized by the fineness of its crystals in contrast to the larger crystal of paraffin wax. It consists of high molecular weight saturated aliphatic hydrocarbons. It is generally darker, more viscous, denser, tackier and more elastic than paraffin waxes, and has a higher molecular weight and melting point. The elastic and adhesive characteristics of microcrystalline waxes are related to the non-straight chain components which they contain. Typical microcrystalline wax crystal structure is small and thin, making them more flexible than paraffin wax. It is commonly used in cosmetic formulations. Microcrystalline waxes when produced by wax refiners are typically produced to meet a number of ASTM specifications. These include congeal point (ASTM D938), needle penetration (D1321), color (ASTM D6045), and viscosity (ASTM D445). Microcrystalline waxes can generally be put into two categories: "laminating" grades and "hardening" grades. The laminating grades typically have a melt point of 140-175 F (60 - 80 oC) and needle penetration of 25 or above. The hardening grades will range from about 175-200 F (80 - 93 oC), and have a needle penetration of 25 or below. Color in both grades can range from brown to white, depending on the degree of processing done at the refinery level. Microcrystalline waxes are derived from the refining of the heavy distillates from lubricant oil production. This by-product must then be de-oiled at a wax refinery. Depending on the end use and desired specification, the product may then have its odor removed and color removed (which typically starts as a brown or dark yellow). This is usually done by means of a filtration method or by hydro-treating the wax material.

Environment

Green-Score, origins bonus, and transportation impact are shown for Worldwide .

Green Score

Overall grade

UnknownUnknown environmental impact

About Green-Score

The Green-Score is an experimental score that summarizes the environmental impacts of food products.

Current scope

The Green-Score was initially developed for France and it is being extended to other European countries. The Green-Score formula is subject to change as it is regularly improved to make it more precise and better suited to each country. Select a country to include the full impact of transportation in the final score.

Green-Score availability

We could not compute the Green-Score of this product because some data is missing. A more precise category, ingredients list, origins or packaging data can unlock the computation.

Bonuses and maluses

Declared origins

Origins of ingredients are missing for this product. Ingredients need to be completed before the transportation bonus can be computed precisely.

Threatened species risk

Contains ingredients that may threaten species or ecosystems, such as palm oil.

Packaging impact

Packaging with a high impact Malus: -15 The information about the packaging of this product is not filled in.

Packaging

Packaging impact

Packaging with a high impact Malus: -15 The information about the packaging of this product is not filled in.

Data precision

The packaging information is not sufficiently precise to compute the most accurate packaging impact. Exact shapes and materials of all packaging components help improve the Green-Score.

Transportation

Declared origins

Origins of ingredients are missing for this product. Ingredients need to be completed before the transportation bonus can be computed precisely.

Forest footprint

Forest footprint

Low risk of deforestation Presence of one or more ingredients at risk of deforestation, but low risk given their quantity, origin and/or labels. Forest Footprint The Forest Footprint is a methodology developed by the association Envol Vert to estimate the risk of deforestation related to our consumption. → More information on the methodology Forest Footprint grade: B Presence of one or more ingredients at risk of deforestation, but low risk given their quantity, origin and/or labels. Total Forest Footprint: 0.001 m² per kg of food

Deforestation risk details

Palm oil Primary ingredient grade: B Primary ingredient: 0.001 m² per kg of food Palm oil production, concentrated mainly in Indonesia and Malaysia, contributes significantly to deforestation. Borneo has lost more than half of its forests since the 1970s. Labels The presence of certain labels can greatly help reduce the risk of deforestation, through the presence of environmental criteria and/or through better remuneration of producers.

Data Source

Product data comes from Open Food Facts. Food Benchmark also adds translations, category comparisons and explanatory calculations.

The database is licensed under ODbL 1.0, individual contents under DbCL 1.0, and product photos under CC BY-SA 3.0.

Product added on December 14, 2017 at 12:39:33 PM UTC by kiliweb .

Last edit on December 30, 2025 at 9:50:20 PM UTC by foodless .

Product page also edited by acistopogm, autorotate-bot, foodless, inf, kiliweb, macrofactor, openfoodfacts-contributors, roboto-app, yuka.SDZBZklaOWRuY0FKaS9JNTlCZnFwOHQrN002WVlqaTZBZEFZSVE9PQ, yuka.SExveEdhc3F1L1lwaHNJQzVRUDF4dTUzMVlPYlJEK3dCL0E3SVE9PQ, yuka.VzVwYUdwWXRuUG82bmN3bTBRL2Y1TUF1MXNlakF6NkhFZlZLSVE9PQ, yuka.ZWZzSkZyZ3dsOGNCbXMwVjBFN0k2OVpTeGFPTlJHUytjdWtCSVE9PQ.